Unoa hybrids? Other bodies that work with Unoa face plates (part 2)

**ginarolo** · 08-16-2011, 10:50 PM

**DajmDumle** · 08-24-2011, 05:22 AM

Unoa Sist on Kid DELF girl body. I know that this hybrid has been posted before but maybe someone will benefit from the images after all. I switched to Unoas Chest part too but it all work equally well with the original breast from Luts. She looks just litte younger then. Difference in resin color is not as honest as it looks utt to be in the pictures. My camera really takes out the little tone difference there is. In RL you can hardly see it.

**sapi3512** · 08-26-2011, 08:04 AM

My newest obsession is high heeled MSD bodies... And really love this new aria doll tiny body since the leg piece comes without any connection in the ankle.. creating a smooth line.

I ordered Unoa Sist and Lusis face plates and currently waiting on Sist make up... I'm still waiting to get a chance with my favorite artist for the Lusis...

**Kouralee** · 09-10-2011, 09:44 PM

Can someone please link me or tell me how to put the unoa headback/faceplate on to a Minifee Active line body?

**Meike** · 09-10-2011, 11:23 PM

Originally Posted by Kouralee

Can someone please link me or tell me how to put the unoa headback/faceplate on to a Minifee Active line body?

I think you are going to need a so-called neck donut to replace the MNF neck part. See also the pictures here (scroll down a bit): http://mnf-faq.wikidot.com/mnf:hybrids

Hope that helps!

**DajmDumle** · 09-11-2011, 02:38 AM

Originally Posted by Kouralee

Can someone please link me or tell me how to put the unoa headback/faceplate on to a Minifee Active line body?

I think you just need to remove the neckpice from the minifee body and then you can do as you do with any other body you have. You need replace the neckpice with some big S-hook to hold the unoa headback on the place or you can use the original metall pin if you hawe one.

**xhanthi** · 09-11-2011, 08:24 AM

Originally Posted by DajmDumle

I think you just need to remove the neckpice from the minifee body and then you can do as you do with any other body you have. You need replace the neckpice with some big S-hook to hold the unoa headback on the place or you can use the original metall pin if you hawe one.

I don't know if this will help but here's an Amaeta headback on my minifee. I just took the neck piece off and used a large ring instead of an S hook. Mainly because I didn't have an S hook lol. I'm not going to lie, getting the neck piece off is going to be the hardest part and a total pain in the butt. I had to take the feet off my minifee to create enough slack to be able to pull enough elastic out of the neck to then work with the neck piece. Also the hook in the MNF neck piece is pretty small and you may need pliers to wiggle it wider to be able to pull the elastic out. Anyway, good luck!

**lee-at** · 11-05-2011, 12:10 PM

I had a crazy idea! will I be run out of town if I posted pictures of an alternative hybrid?
I'm thinking of getting a DZ head, and putting it on a Unoa body.

Thoughts anyone???

**djgigahertz** · 11-05-2011, 12:35 PM

I put the Unoa small bust onto an older (2007ish) Dollzone body and while the color is close its not perfect...the fit however is really good!...i would post but shes actually got a Minifee head on lol shes my frankindolly

**Moonycat31** · 11-07-2011, 10:42 AM

Just try few days ago a fp Unoa sist wink on a Custom House Ange Ai body. It's a little bit weird... But I post it here to let you see.

**guls207** · 11-08-2011, 06:27 PM

Hey guys I was wondering if anyone knew of a slightly shorter body (40cm to 42cm) that has curvy legs like the original Unoa body. I tried Aria but it's a little too tall and minifee was curvy but a little too thin. I know it's a long shot but wanted to try asking. I had no idea I was so picky about legs! 0____0

**Megu-chan** · 11-09-2011, 05:20 PM

Originally Posted by guls207

Hey guys I was wondering if anyone knew of a slightly shorter body (40cm to 42cm) that has curvy legs like the original Unoa body. I tried Aria but it's a little too tall and minifee was curvy but a little too thin. I know it's a long shot but wanted to try asking. I had no idea I was so picky about legs! 0____0

Usually people use Dollmore kids, legs are similar and the resin too, so almost perfect match.
I checked the color between my dollmore and my Chibi and yes really similar.
Dollmore kid's body is cheap and very nice, and you can get it really quickly, just need an head back, you can order one to Amaeta , see upper.

MDD was too my option, unfortunately I didn't try yet.
But I think ok, I use to put resin head on DD body and U-noa head are not heavy.
So could be a good idea.

Dollmore body I think is almost same price.

**guls207** · 11-09-2011, 08:48 PM

Lol Thanks!

Gah the dollmore body is really cute!

I think by the looks of it a Unoa L-bust might fit...if not it's still not a problem the small bust is nice too.

**Megu-chan** · 11-09-2011, 11:36 PM

Some persons did it use the big breast part, but you have to sand a lot , but possible.
Another idea bra +tissu, XD
Like teenager, ^_______^

The Dollmore is the best match and the legs really look like same sharp.

The dollmore resin match, The mini model doll, ok legs are so long, but her body is beautiful.
Maybe just check all 40cm body / doll by Dollmore.

I think to do hybride too and it will be Dollmore or MDD.

**Calio4** · 11-20-2011, 07:44 AM

I put my Queenie on a 5Stardoll body and I love it! I think she has lovely shapely legs

I put her default Unoa hands on as well.

**Calio4** · 11-28-2011, 07:46 AM

Yes I'm really happy with the match!
Here's a closeup -

**kesha_67** · 11-29-2011, 06:27 AM

My Unoa hybrid, a lusis face + Dollchateau body.
I chose a normal pink skin, with a blush the both resins match great. I love the way she looks, so thin

**alogue** · 11-29-2011, 02:02 PM

I have some pictures of my Chibi Unoa hybrid

She is a Chibi Roron plate on a Chicline small bust, cutie leg body. I still need to blush her FP to match :\

Here are some more images that may or may not be helpful ^^;

http://farm7.staticflickr.com/6041/6...0294a367_o.jpg
http://farm8.staticflickr.com/7174/6...650bfabc_o.jpg
http://farm8.staticflickr.com/7031/6427261221_45b4c9a6f9_o.jpg

**Teacups and Teddies** · 12-31-2011, 06:22 AM

Hey guys! Does anyone know if the 1.5 FP is a good resin match for the Aria tiny 14yrs body? >_<

**aishiteru** · 01-13-2012, 02:06 AM

Originally Posted by dambuster01

I agree that it is nice to have the different bodies because it makes for a great variety in our dolls. I plan in the future in getting a Lusis faceplate and perhaps making another hybrid.....maybe with a Mini Fee body, thought we shall see!

yes, it is usefull to have several different body for so many FP... Perhaps, i will comissioned someone here or i will made if i am not lazy or busy ! !!!

Thank you too Jo_H !

Thread: Unoa hybrids? Other bodies that work with Unoa face plates (part 2)

Thread Tools

Unoa hybrids? Other bodies that work with Unoa face plates (part 2)

Posting Permissions